At the following phase, a coil turner T is supplied as opposed to a fixed skid S (there is no immobile skid S13). The coil turner T changes the coil W, which is communicated from the earlier point, by 90 degree with respect to the packing collection to be able to take the coil axis into alignment with all the packing range axis.

Then, at immobile skid S14, coil area covers are used on the corners of the outer and inner sections of the coil W, positioned in positioning together with the packing range axis, along with a plurality of eye straps are axially stretched across the inner and outer peripheries of your coil to longitudinally tie up the coil.

With the following phase, a coil turner T is supplied rather than a stationary skid S (there is not any stationary skid 15). The coil turner T converts the coil W, which is presented in the eyesight strap binding period with regards to the packing range so as to navigate the coil axis perpendicular towards the packing line axis.

Then, at fixed skid S16, hooping is impacted to bind a key body strap about the coil physique, which has been axially tied with a plurality of eyes straps.

At stationary supplies skid S17, a predetermined label is attached on the coil, which was covered with the main system band. With the after that stationary skid, skid S18, a QA belt is attached to the wrapped and labeled coil, which belt safeguards the coil from harm each time a plurality of covered coils are piled one particular after the other. At stationary skid S19, the completely wrapped coil is looked over, and fixed skids S21 and S20 comprise coil hoisting (launching) placements, in which the covered coil is hoisted with a crane. A plurality of those coil hoisting jobs could be presented, as required, along the coil packing series, in which case extra corresponding stationary supplies skids S may be supplied.

Each and every job station inside the over-detailed coil packing line, a dedicated equipment (not displayed) for undertaking the proper operations is supplied.

Set up on to the ground can be a conveyance means for successively conveying coils in the upstream on the downstream stages, a explanation which adheres to.

A path 1 runs through every one of the phases in the first place for the finish where immobile skids S are given. A reciprocating carriage 2 (hereinafter referenced just as “carriage”) developing a hoisting and decreasing system is provided in between each two adjacent fixed skids S.

Each carriage 2, which can perform vacationing individually, gets a coil W from your stationary skid S on the upstream transfers and side it to the fixed skid about the downstream part.