Within this coil packing collection, fixed skids S1 – S12, S16 and S14 – S21, for briefly promoting coils W, are given in the job stations of the handling steps as well as coil delivery stations that happen to be provided when needed. The processing techniques of the coil packing range which arise at these different stationary skids S1 – S12, S14 and S16 – S21 are the following:

The stationary skid S1 is utilized for checking the coil quantity and measuring the exterior diameter and width in the coil. In fixed skid S2, papers corner protectors are put on the shoulder area of the coil. Another fixed skid, skid S3, is provided with regards to changing the pitch (distance) in between the adjacent techniques; skid S3 constitutes a short-term depot. At fixed skid S4, inner peripheral papers is placed into the interior in the coil W. At immobile skid S5, the coil W is covered with an outside peripheral papers having a size related to how big the coil W.

The next immobile skid, skid S6, like skid S3, is supplied when it comes to pitch adjustment; the skid S6 is definitely an momentary depot. At stationary supplies skid S7, the edge area of the outer peripheral pieces of paper increasing from the coil W is flattened so as to be squeezed into the interior in the coil. Stationary skid S8 is provided for fixing an inner band for the coil. This fixes the document benefit portion squeezed in to the coil and helps prevent the wrapping document and the indoor in the coil from being ruined by tongs which can be made use of by an overhead crane to handle the coil following they have approved throughout the coil packing line.

The group of actions from your pieces of paper corner guard using method, executed in the stationary supplies skid S2, towards the stage of fixing the inner ring for repairing the exterior peripheral paper, executed in the stationary supplies skid S8, make up the process of packing the coil W in wrapping pieces of paper, which procedure might be modified when needed. For example, the inner document installation phase (immobile skid S4) could be omitted.

The succeeding function steps at stationary supplies skids S9 to S11 are just relevant to products to be exported In these techniques, the coils wrapped in pieces of paper are further more wrapped in sheets of iron. At stationary skid bottom, top and S9 dishes are inserted in the finish types of surface in the coil. At stationary skids S10 and S11, the iron page wrapping process is performed, where a metal sheet is applied towards the exterior peripheral top of the coil. For products which are certainly not being exported, stationary supplies skids S9 via S11 might be omitted.

At stationary skid S12, the outer periphery of your coil, which has been wrapped in pieces of paper (or further covered with stainlesss steel sheets), is linked at each finishes by way of bands.