All of the elements which has been detailed, together constitute a total machine prohibit which can be easily attached to or unattached in the frame from the primary coil packing machine, a section 312 that is displayed in FIG. 9, by way of weighty bolts 313 which lengthen via shut fitted holes 314 in the body of the machine with the bolt brain if possible sitting in a counter-top-sunk golf hole 316. The structure 280 has precision tapped holes 317 to get the bolts 313. Whilst the machine disables as described and shown during these FIGS. 9, l0 and 11 and in one other figures already explained, are relatively heavy, the inner work surface is machined in order that it could be installed in specifically installed exposure to theouter surface of the coil packing machine physique, and only 2 of the heavy bolts above explained are necessary to keep up it in exactly the appropriate regards to one other aspects of the coil packing machine.

They are not close to the side’of the frame 230 and extend into the opening in the body of the machine and can thus readily be driven by motors located inside the machine body, though it will be noted that the sprockets such as 286, 310 and 291, with their mountings all project beyond the inner surface of the frame.

Discussing FIG. 12, there is certainly in this article illustrated a registration management process that will now be detailed:

Device in coil packing machine shows a web-based which might have insignia published thereon, one particular becoming pointed out at 201. If the insignia, of which it will be understood there is a very large number, uniformly spaced along the web, pass a predetermined spot 202 at the proper interval, the electric eye will not actuate the relay circuit, but if the insignia become slightly out of register, the electric eye mechanism 203 will immediately actuate the relay which will act in the usual manner through the control circuits and will cause one or the other of the switches 204 and 205 to be energized and electric current to be conducted either to solenoid 206 or to solenoid 207, as the case may be. If solenoid 207 is actuated, a dog 208 is pushed into the notches of the dog ring 209 and locks it against turning, or if solenoid 206 is actuated, dog 210 locks dog ring 211.