Within the above machine the film carriage/holder on hose coil wrapping machine along with the roll of wrapping material is built to reciprocate at right angles towards the direction of travel from the film. Nevertheless the film can be created to reciprocate in different ways. For instance the movement from the film carriage/holder (4) could be limited to rotary action where the rotor blades along with the set up of articles can be created to reciprocate. An additional possibility is for the film carriage/holder of hose coil wrapping machine and also the plates being designed to rock forward and backward having a motion getting element acting at right angles towards the direction of travel from the material. Generally reciprocation from the film carriage/holder is preferred.

The support members may take many forms provided that they’re sufficiently smooth and free of mounds which in order to be separated from between your windings of wrapping material and also the hose that have been wrapped. Thus they may be flat rotor blades or plates as highlighted in Fig. 1 or by means of flattened tines of the fork. The support could be situated above and underneath the article on hose coil wrapping machine. However as proven in Fig. 3 they (31 and 32) could be situated on each side of this article.