ever, since the insulation resists taking new shapes and must be. applied in very thin layers, particularly whe-n a coil is wrapped by hand. it is possible to-obtain well insulated coils by employingI hand wrapping methods, but the resultant product is expensive because of the undue amount of labor involved’in themanufacturing process er than usual in order to account for the decreasel in di- The thicker layers of material thus used require’larger’slotvv dimensions which increases the physical size andrcost of the machine.

Cable Coil wrapping machine and devices are currently usedfor wrapping coils withv strips of insulating substance possessing strip widths approximating 2 ” but` significant manualdexterity is required from the operator sincev the c gas is transferred in accordance with the strip of fabric. It is obvious that the size of coil susceptiblevoff being wrappedinthis manner is limited because of weight and size considerations thereby precludingthe wrapping of coils for large machines by a single operator further. Very hot wrappingmachines are already-accustomed to cover-linens of greater width but shrinkage of your efficiency resulting from implementation of heat takes place during the wrapping procedure to ensure complete edge should not be considered in the shrinkage characteristics. Also, sizeable expertise is requiredbythe operator ever since the coil-l must be transferred in accordance with transferring parts in the machine which more improves the probability of inadequate wrapping. Because of the point that the uncovered areas of the machine are operatedv at temperatures from the area of l-50 C., the user need to exercising attention to stop simply being burned which boosts the wrapping time forv any distinct coil.

Properly, a physical object in our invention is always to eliminate the above-detailed down sides now inherent in the preceding art work models by providing a fresh machine effective at speedily wrapping the port servings of a coil without rea quiringy a high level of skillon the part of an owner.

Anotherobject of the creation is usually to provide amachine .l able to handle dense levels of material when at the same time obtaining av small wrapduring the wrapping procedure in order to generate al greater insulated coil with a much more ecot nomical schedule.