A curler conveyor 17 comprising a plurality of parallel rollers is carried by the top of the scissor elevate 16. When the scissor raise 16 is expanded vertically the roller conveyor 17 is on the levels with and might be aligned using a release roller conveyor 18. A film dispensing system 19 like the UniTension? System manufactured by International Wrapping Machine, Inc. is located proximal the turntable 10. Even though the unit 19 for dispensing a film 21 may be vertically movable as it is traditional, it is far from required that system 19 be movable. If at all possible the unit 19 is placed with a size to ensure that it feeds the film 21 directly to top of the area of the wall surfaces 13 with one half of the breadth of the film, as well as other part thereof, stretching over the wall surfaces 13. Inasmuch because the walls are continuous in elevation, model 19 can also be taken care of with a continuous elevation. The exterior surface areas from the surfaces 13 are layered using a coating of material including Teflon? or even the like that will supply only small adherence towards the film 21. That is to say, the film 21 should readily stick to the surface of the walls 13 and be entrained thereon by the rotation of the container 14; however the film 21 should be free to slide vertically on the walls if urged axially with respect to the turntable 10.

In operation, the scissor lift 16 is put within its fully decreased position. A pallet 23 is positioned atop the roller conveyor 17 in the box 14. A different base cover 24 or even a bottom limit included with the pallet 23 is provided with the load of merchandise on top of the pallet 23. This product might be loaded to the container 14 as being the container is located erect or the box 14 may be tilted on hinge 12 to aid reloading, as proven in FIG. 3. When you use unfilled cans, specified from the numeral 26, a layer of containers is placed on top of the base limit 24, then this separator sheet 27 is positioned atop the containers. Yet another covering of containers is combined with one more separator page and the layering is frequent before the compartment 14 is loaded into a desired elevation, typically from 30-half a dozen to forty-6 inches. A high limit 28 matches across the uppr coating of product or service, thus the whole weight which includes leading limit 28 and base cap 24 is restricted through the compartment 14.