The procedure is the next:

Throughout the wrapping of the wire, the wire moves in translation and also the coil-holder set up in rotation, which supplies even wrapping.

The rotation of lever 8, in synchronism using the coil-holder on wire coil packing machine, guarantees the movement from the wire through friction, so that the strain around the wire is suitable into it. This wire tension is measured by way of a sensor 25. When the tension from the wire is observed to become too great, the rate different means 20 is triggered to be able to boost the angular speed from the drum and for that reason those of lever 8.

If, however, the cable is inadequately taut, the drum speed is reduced.

A presser curler 26 keeps wire 6 within the groove of lever 8 this groove, with a triangular profile, supplies a friction and, therefore, a pretty much strong drive from the wire based on whether or not this goes faster or reduced with regards to the right speed. There’s therefore “self-adjustment”.

This wire coil packing machine is equipped with as numerous cogged ring 23, position gear 24 and motorized lever 8 devices as you will find coils 4. Ideally just one drive chain 22 can be used, out of the box proven in FIG. 2 that is a partial finish look at a piece of equipment with 16 coil-holders.